Draining your Intex hot tub is an essential maintenance task that ensures the longevity and optimal performance of your relaxation oasis. Whether you’re preparing for winter storage, cleaning the tub thoroughly, or simply replacing the water, knowing how to drain a Intex hot tub properly is crucial.
In this guide, we will take you through the step-by-step process of safely and efficiently draining your Intex hot tub, providing you with the knowledge and confidence to tackle this task with ease. We will cover the necessary equipment, precautions to take, and helpful tips to make the draining process smooth and hassle-free.
By following these guidelines, you can maintain a clean and well-functioning hot tub, creating a rejuvenating and hygienic environment for your relaxation and enjoyment. So, let’s dive in and discover how to drain your Intex hot tub like a pro!
Where Is Drain Plug on Hot Tub?
The drain plug on an Intex hot tub is typically located at the bottom of the main body. Once you locate it, you will need to remove the plug from its hole by unscrewing it counter-clockwise using a wrench or pliers. Some models may have a cap that needs to be removed first before accessing the drain plug. If you need assistance locating the drain plug, refer to your hot tub’s instruction manual for instructions specific to your model and type of hot tub.
Once the drain plug is removed, you will need to place a bucket or other container beneath the spout, as water from the tub will come out very quickly. It’s important that you have a container ready to catch the water in order to avoid any potential flooding or mess.
Once the bucket is in place, slowly turn the drain plug clockwise to open it and allow the water from your hot tub to flow out. It’s best if you do this slowly so that you can monitor how quickly the water is draining and ensure that it’s not overflowing your container or causing any other issues.
Once all of the water has drained from your hot tub, replace the drain plug back into its hole and use a wrench or pliers to tighten it by turning it counter-clockwise. Make sure it is secured tightly before using your hot tub again. With these steps, you should now know where is drain plug on hot tub and how to drain an Intex hot tub.
Is It Ok to Drain a Hot Tub and Leave It Empty?
It is not recommended to leave a hot tub empty for an extended period of time. The internal components and plumbing system of the hot tub can become damaged or bent if the pressure from the water is relieved by draining it.
Additionally, when air gets into the pipes and plumbing, it accelerates corrosion which can lead to costly repairs or replacements in the future. For this reason, once you have drained your hot tub, it should be refilled as soon as possible.
If you are planning on leaving your Intex hot tub empty for an extended period of time (longer than a few days), you should consider winterizing it before draining it completely. Winterizing a hot tub involves adding antifreeze to the lines and taking other steps to prevent damage from cold temperatures, which can help protect your hot tub while it is empty.
It’s important to remember that an empty Intex hot tub may be more difficult and time-consuming to refill than a partially drained one. If your hot tub has been completely drained, you will need to fill it up slowly in order to avoid air bubbles in the plumbing.
Additionally, you may need to check for leaks before and after refilling your hot tub, as drained pipes can be more prone to cracking or leaking when refilled. If possible, it is best to fill up your Intex hot tub gradually and keep it slightly full while not in use in order to avoid any potential damage.
8 Methods How to Drain a Intex Hot Tub
1. Use the Drain Plug
The drain plug is located on the bottom of the tub and is used to drain the water out. To use the drain plug, simply remove it and allow the water to drain out. Make sure to place something underneath the drain plug to catch any water that may escape.
While draining the hot tub, you may need to periodically clear out any debris that may be clogging up the drain. Make sure to re-install the drain plug once you are finished draining the hot tub. Although it may seem obvious, do not forget to remove any objects that you used to cover the drain plug.
2. Use a Garden Hose
If the drain plug is not working or you don’t have one, you can use a garden hose to drain the water out. To do this, attach the hose to the spigot and turn it on. The water will then flow out of the tub and into the hose. If the flow is too slow, you can also try using a sump pump to help speed it up.
Be sure that the hose is not clogged or kinked, as this can hinder the flow of water. Once the tub has been drained, be sure to remove any debris that may have been collected in the hose. After doing this, you can then turn off the spigot and disconnect the hose.
3. Use a Submersible Pump
If you have a lot of water to drain, you may want to use a submersible pump. This type of pump is designed to move large amounts of water and can be rented from most hardware stores. To use a submersible pump, simply place it in the tub and turn it on.
The water will then be pumped out of the tub and into whatever container you have placed beneath it. Make sure you monitor the water level and turn off the pump when it reaches a safe level.
4. Use Gravity
If you don’t have a pump or a hose, you can still drain your tub using gravity. To do this, open up all of the valves on your tub and allow the water to flow out. You may need to place something under the tub to catch the water as it drains out.
To expedite this process, you can use a broom handle to push the water out of the tub faster. Once all of the water is drained, you will need to wipe down the inside of the tub to remove any residue that may have built up.
5. Use a Wet/Dry Vacuum
If you have a wet/dry vacuum, you can use it to suck up the water from your tub. To do this, simply place the vacuum in the tub and turn it on. The vacuum will then suck up all of the water, which can be disposed of later.
6. Use an Air Compressor
An air compressor can also be used to remove water from your tub. To do this, simply attach the air compressor to the valve on your tub and turn it on. The air will then compress the water and force it out of the tub.
This is a much faster method than draining your tub the traditional way, and it can be done in a matter of minutes. However, you should make sure that you are using an air compressor with enough power and pressure to handle the job.
7. Use a Shop Vacuum
A shop vacuum can also be used to remove water from your tub. Simply place the vacuum in the tub and turn it on. The vacuum will then suck up all of the water, which can be disposed of later. Make sure that you are using a shop vacuum and not a regular household vacuum, otherwise it will not be powerful enough to suck up the water quickly or effectively.
8. Use a Syphon
If all else fails, you can use a syphon to remove the water from your tub. Simply attach one end of the syphon to the hose that you used to fill your tub and place the other end in a lower area, such as a drain.
Make sure there is some kind of bucket or container beneath the end of the syphon so that it can collect any excess water that may be present. Once everything is set up, turn on the syphon and allow it to do its job. Once the water stops flowing, you are done!
Conclusion
Draining your Intex Hot Tub is not as hard as you think. It’s a relatively simple process that can be done in just a few easy steps.
First, remove the filter and cover from your hot tub set up; then disconnect and plug the hose connections, using your water pump to drain the tub into an appropriate drainage spot away from home and other property—it’s important that one should always exercise caution when dealing with electrical equipment near large amounts of water.
Finally, be sure to wash down the entire hot tub area after it’s been drained to ensure proper cleaning. So, there you have it – a quick and easy guide on how to drain a intex hot tub.
