Are you trying to turn on your Whirlpool water heater? Don’t fret, it’s easier than you think. Whether your water heater is gas or electric, the steps you need to take are virtually the same.
Hot water is essential to everyday life – from cooking and cleaning to washing dishes to taking a hot shower or bath. But when it comes time to heat up this necessary source, many people find themselves overlooking how simple it can be with the help of a Whirlpool water heater. It’s energy efficient and easy to set up, with plenty of features that ensure you get the most out of your appliance while still ensuring your home stays safe and comfortable.
Whether you’re replacing an old model or looking for something new, learning how to turn on whirlpool water heater is quite simple!
What are the Benefits of a Whirlpool Water Heater?
Whirlpool water heaters offer a variety of features that can help to make your life easier and more energy-efficient. These include:
High Energy Efficiency Rating: With a high Energy Star rating, you’ll do your part to help the environment while still enjoying all the hot water you need.
Faster Recovery Times: Return to showering, washing dishes, and laundry in no time with rapid heat recovery rates on Whirlpool models.
Smart Technology: Smart diagnostic tools allow you to easily diagnose, troubleshoot and repair any problems that may arise with your hot water heater without having to call in an expert.
Multiple Model Options: Choose from various tank sizes and power sources, including electric, gas, or propane, so that you can find the perfect appliance for your home.
What Will You Need?
Before you get started, make sure you have the following items on hand:
- A flathead screwdriver.
- Safety gloves.
- Protective eyewear.
Once you have everything you need, you’re ready to begin.
10 Easy Steps on How to Turn on Whirlpool Water Heater
Step 1. Locate and Inspect the Water Heater
The first step is to locate the water heater. If you don’t know where it is, check your basement, garage, or utility room. Once you’ve located the appliance, inspect it for any signs of wear and tear or damage. If everything looks good, then you can move on to the next step.
Step 2. Remove Power Sources
Before you begin working on any electrical or gas appliances in your home, it’s important to remember to turn off all power sources before starting work on them. This includes unplugging cords from outlets and shutting off any valves that could be supplying electricity or gas to the water heater. You should also ensure that the breaker is off in case of any power surges.
Step 3. Check Wiring Connections
Once you’ve removed power sources, it’s time to check all the wiring connections. Make sure everything is properly connected and free of any damage or corrosion. If there are any loose connections, tighten them up with a flathead screwdriver.
Step 4. Turn On the Power Source
Now that all your wires are secure and in place, you can go ahead and turn on the power source. This can either be done by plugging in the cord or turning on a gas valve. Moreover, you should also switch the breaker back on if it’s an electric water heater.
Step 5. Set Temperature Settings
Next, it’s time to set your desired temperature settings for your Whirlpool water heater. You can do this by using an adjustable knob or digital temperature control. If you don’t know how to adjust the temperature, consult your user manual for instructions.
Step 6. Check for Leaks
Once you’ve set the temperature, it’s time to check for any possible leaks. Make sure all pipes and connections are secure and free of any water or moisture. If there is a leak, make sure to turn off the power source right away and call an expert to help repair the issue before turning on your water heater again.
Step 7. Turn On the Pilot Light
If your Whirlpool water heater is gas-powered, you’ll need to turn on the pilot light at this point as well. To do so, press down on the “ignition” button and hold it until you can smell gas. Once the pilot light is lit, turn off the gas valve. Always make sure to keep a fire extinguisher nearby when working with flammable materials.
Step 8. Turn on the Hot Water Heater
Once all your connections are secure and all power sources are on, you’re now ready to turn on your Whirlpool hot water heater. This can be done either by using a switch or pressing down on an ignition button (depending on the model). If it’s an electric water heater, you may need to press down on a “reset” button. Don’t forget to wait a few minutes for the water to start circulating before you use it.
Step 9. Check Temperature Settings
Make sure that all your temperature settings are in order before turning it up to maximum heat. Wait for at least 30 minutes before increasing the heat to ensure everything works properly. Don’t forget to wear safety gloves and protective eyewear while doing this. Otherwise, you might get burned.
Step 10. Test It Out!
The last step is to test out your water heater. Turn on a hot water faucet and check the temperature to ensure it works properly. If everything looks good, then you’re all done! Be careful and enjoy the hot water!
Following these simple steps, you should have a fully functioning Whirlpool water heater. Enjoy the convenience of not having to worry about how to turn on your water heater ever again!
5 Additional Tips and Tricks
1. Ensure that your power supply is on. To turn on a Whirlpool water heater, the power must be turned on at the main circuit breaker or fuse box.
2. Locate the power switch on the side of the water heater. On most Whirlpool water heaters, this will be a red switch near the unit’s bottom.
3. Flip the switch or press the button to activate your heater’s power supply. Depending on how your Whirlpool water heater is designed, this action should cause an indicator light to come on, indicating that electricity is flowing through your appliance
4. Check for unusual noises coming from your water heater after turning it on. If you hear any strange sounds, such as humming, grinding, or ticking, turn the unit off immediately and contact a professional plumber or electrician.
5. Test your Whirlpool water heater by running hot water in a sink or bathtub in order to verify that it is heating properly. If the water remains cold after several minutes, there may be an issue with the power supply, so you should double-check that it is on and working properly.
Once you have verified that your Whirlpool water heater is in working condition, you can rest easy knowing it will provide hot water for many years to come!
5 Things You Should Avoid
1. Avoid turning the water heater on and off in short bursts. This could cause damage to the unit and reduce its lifespan.
2. Do not attempt to turn on a Whirlpool water heater if you are unfamiliar with how it works or how to troubleshoot potential problems. It’s best to consult a professional plumber or electrician before attempting any work on your own.
3. Never leave the power switch on when the appliance is not being used, as this can lead to unnecessary energy consumption and higher electricity bills.
4. Refrain from placing large objects near your water heater that could restrict air flow, as this can interfere with how it functions and even cause overheating of components inside the unit, which may result in an electrical fire.
5. Don’t attempt to repair or replace any parts of your Whirlpool water heater on your own, as this can be dangerous and may cause further damage to the appliance. If in doubt, always contact a professional for advice and assistance.
Avoiding these five common mistakes will help you safely use your Whirlpool water heater for years to come. Follow these steps, and your appliance should be working in no time, providing hot water whenever you need it!
Conclusion
Turning on your whirlpool water heater can be daunting, especially if you’re unfamiliar with all the steps. However, by closely following the instructions we have outlined in this blog post, you should now have the confidence and know-how to turn it on without any issues.
And best of all, by turning the hot water heater on yourself instead of hiring a professional to do it, you just saved yourself time and money. So remember these tips whenever you need help turning your whirlpool water heater back on, and enjoy those hot showers!
Hopefully, the article on how to turn on whirlpool water heater was a helpful resource for you. Good luck and happy heating! Thank you for reading.
