Did you ever drop your favorite necklace down the sink drain and can’t seem to get it out? Don’t worry. We’ve got you covered. When you’re done with your necklace, don’t just toss it in the trash.
If you’re like me, you’ve probably at one time or another, gotten a necklace stuck in the sink drain. It’s not a fun experience, but there is hope! In this blog post, I’ll share with you some tips on how to get necklace out of sink drain. So read on and learn how to save yourself from an expensive plumbing bill!
How Do You Get an Object Out of a Sink Drain?
Getting an object out of a sink drain can be tricky, but it’s not impossible. Here are the steps you’ll need to take to retrieve your precious necklace:
- Use a flashlight or phone light and look down into the sink drain for any visible blockages. If you spot something that looks like your necklace, use needle-nose pliers to carefully pull it out.
- If you don’t see the necklace, there might be an obstruction further down the drain. If this is the case, you’ll need to use a pair of pliers to remove the sink strainer and take a look inside.
- Use an auger to reach further down into the drain and feel for any obstructions. Be careful not to push too hard, as you don’t want to damage the pipe lining or your necklace.
- If the auger doesn’t work, you can try using a cup plunger to push the obstruction out of the drain. Place the cup firmly over the drain hole and move it in a circular motion to create suction pressure. This should loosen any blockages and help get your necklace back within reach.
9 Methods How to Get Necklace Out of Sink Drain
1. Use a Plunger
If you have a plunger, you can try using it to dislodge the necklace from the drain. Simply place the plunger over the drain and push and pull it up and down vigorously. If done correctly, the suction from the plunger should be strong enough to grab onto the necklace and pull it out. However, if the necklace is too far down, this method may not be effective.
2. Use a Wire Hanger
If you don’t have a plunger, you can try using a wire hanger for fishing the necklace out of the drain. First, straighten out the wire hanger so that it is long and thin. Then, bend one end of the wire into a small hook. Carefully insert the hooked end into the drain and see if you can snag the necklace. If so, gently pull on the wire hanger until the necklace comes out. Although this process is a bit tedious, it can be an effective way to get your necklace out. Try to remove any debris from the drain before attempting to fish out the necklace.
3. Use Boiling Water
Another method you can try is pouring boiling water down the drain. The heat from the water can help to loosen up any debris that may be stuck to the necklace, making it easier to remove. Simply boil a pot of water and carefully pour it down the drain. Then, try using one of the other methods on this list to remove the necklace. While this may not be the most effective option, it can help with loosening any stuck items. Be sure to use caution when pouring boiling water down your drain.
4. Use Vinegar and Baking Soda
If boiling water doesn’t work, you can try using vinegar and baking soda instead. This combination can create a powerful cleaning agent that can help to break down any debris that is stuck to the necklace. To use this method, mix together equal parts vinegar and baking soda and pour it down the drain. Let it sit for a few minutes before flushing it with hot water. Then, try removing the necklace with one of the other methods on this list.
5. Use Dish Soap
Dish soap can also be used to help remove a stuck necklace from a drain. The soap can help to break down any grease or debris that may be holding onto the necklace. To use this method, simply squirt some dish soap into the drain and let it sit for a few minutes before running hot water through it. Then, try removing the necklace with one of the other methods on this list.
6. Use a Vacuum Cleaner
A vacuum cleaner can be a great tool for removing a stuck necklace from the drain. You can use the suction power of the vacuum cleaner to help suck up any debris that may be attached to the necklace and hold it in place. To use this method, simply position the hose over the drain and turn the vacuum cleaner on.
Allow it to run for a few minutes, and then see if the necklace has been freed from the drain. You may need to repeat this process several times until the necklace is free. If your vacuum cleaner does not have enough suction power, you could also try using a plunger to assist with freeing up any debris that may be clogging up the drain. Be sure to use safety precautions when dealing with a clogged drain, as it can become very dangerous if handled improperly.
7. Use Pliers
Pliers are another tool that can be used to help remove a stuck necklace from a drain. Before using them, however, make sure they are clean and in good condition so you don’t damage the jewelry.
Place the pliers around the jewelry and slowly apply pressure to try to pull it out. If that fails, a pair of needle-nose pliers can be used to get a better grip on the necklace and twist it back and forth in order to free it from its stuck position. Be careful not to yank or pull too hard, as this can cause damage to both the necklace as well as the drain itself.
8. Apply Lubricants
Applying lubricants such as dish soap or WD-40 is another way of getting your necklace unstuck from a drain. Simply place some of either substance onto the drain near where your necklace is stuck and wait for a few minutes before attempting to remove it again.
The lubricant will help to loosen the suction provided by the drain, allowing you to have better success in retrieving your necklace. You should be careful not to pour too much lubricant down the drain as it could cause a clog. If you are unable to remove your necklace after applying lubricants, then it is time to move on to another method of extraction.
9. Use a Plunger
Using a plunger can be an effective way of removing your necklace from a drain, although this may require some additional strength and effort on your part. Place the plunger over the opening of the drain and press down firmly with rapid movements for several minutes until you notice that pressure has been released from around your stuck jewelry.
Once the pressure has been released, you should be able to retrieve your necklace with relative ease. Be sure to rinse any soapy residue from the drain before you move on.
Tips & Tricks While Getting Necklace Out of Sink Drain
- Put on rubber gloves and eye protection to protect yourself from the germs that can be present in the sink drain.
- Have a flashlight handy so you can see what type of necklace is stuck and how deep it is down the drain.
- Locate a bucket or large bowl as well as an old towel to place beneath the sink drain in case any water splashes out.
- Disconnect the p-trap under the sink and look for the necklace that is stuck inside.
- If you can’t locate it easily, then use a set of pliers or tweezers to extract it from the drain. Be careful not to scratch or damage the jewelry while retrieving it.
- Place a new p-trap on the drain pipe and make sure all connections are tight before turning on the water supply again.
- Clean your necklace with warm, soapy water to ensure that there are no bacteria present after removing it from the sink drain before wearing it again.
Conclusion
Luckily, getting your necklace out of the sink drain is not as complicated as it may seem. With a little patience and the right tools, you should be able to get your necklace back in no time. If you find yourself struggling, there is no shame in reaching out for help from a professional.
A plumber will have the experience and expertise to safely remove your necklace without damaging your sink. Now that you know how to get necklace out of sink drain, you can rest easy knowing that you won’t have to replace it anytime soon. Thanks for reading and feel free to share this post with anyone else who may need it. With these simple steps, getting your necklace back should be a breeze.
