A pressure assist toilet is a type of flushing toilet that uses a stored tank of water to provide extra power to the flush. Pressure-assist toilets are often used in commercial settings but can also be found in some residential homes.
If you have ever had the misfortune of dealing with a clogged toilet, then you know how frustrating it can be. Even more so if it’s a pressure-assist toilet. Pressure-assist toilets are powerful, but that power comes at a price. They can be difficult to unclog. In this blog post, You will learn in detail how to unclog a pressure assist toilet.
Step-by-Step Processes for How to Unclog a Pressure Assist Toilet
Step 1: Turn off the Water
Before you do anything, it is important to ensure that no water runs into the toilet. Otherwise, you will just be dealing with a never-ending mess. The best way to do this is to turn off the shut-off valve that is located behind the toilet.
Step 2: Use a Plunger
If the clog is relatively minor, you may be able to fix it with a plunger. Just make sure that the plunger you use is big enough to cover the entire drain. Otherwise, it will not be effective.
Step 3: Use a Drain Snake
If the plunger does not work, you may need to use a drain snake. This is a long, flexible piece of metal that you insert into the drain to clear the clog.
Step 4: Use a Chemical Drain Cleaner
If neither the plunger nor the drain snake works, you can use a chemical drain cleaner. Just be careful with these products, as they can be very caustic and harmful if used improperly.
Step 5: Use Boiling Water
Another option you can try is pouring a pot of boiling water down the drain. This can sometimes help to loosen up the clog enough to be cleared. If you still cannot clear the clog, you may need to remove the toilet tank lid to get to the clog.
Step 6: Use a Wire Hanger
Once you have removed the toilet tank lid, you can try using a wire hanger to clear the clog. Just be careful not to scratch the toilet bowl with the wire hanger.
Step 7: Use a Plumbers’ Snake
You can use a plumber’s snake if the wire hanger does not work. This is a longer, more powerful version of the drain snake that is often used to clear more stubborn clogs. If you have tried all of the above methods and still cannot clear the clog, you may need to call a plumber.
You Can Check It Out to Remove Shower Plate without Screws
Step 8: Prevent Future Clogs
Once you have finally cleared the clog, it is important to take steps to prevent future clogs. One way to do this is to ensure that only toilet paper goes down the drain. Do not flush anything else, as this can cause another clog to form.
Tips for How to Unclog a Pressure Assist Toilet
- Always wear gloves when handling a pressure-assist toilet.
- Do not use chemicals to unclog the toilet. This can damage the unit.
- Use a plunger to try and dislodge the clog. If this does not work, contact a professional plumber.
- Never put your hand inside the toilet bowl to try and clear the clog.
- Do not use a metal hanger or any other sharp object to try and clear the clog. This can damage the unit.
- If the clog is located in the trap, do not attempt to remove it yourself. This can be very dangerous.
- Never flush the toilet while someone is trying to clear the clog. This can cause serious injuries.
- If the water level in the bowl begins to rise, immediately stop trying to clear the clog and contact a professional plumber.
- Do not use an electric power washer to try and clear the clog. This can damage the unit.
- Always consult with a professional plumber before attempting any type of repair on a pressure assist toilet.
How Does a Pressure Assist Toilet Work?
A pressure-assist toilet uses a small amount of water to create pressure that helps to push waste through the trap and into the sewer line. This type of toilet is often used in commercial settings, as they are very effective at preventing clogs. However, if something does become lodged in the trap, it can be difficult to remove.
You can unclog a pressure-assist toilet in a few different ways. One way is to use a plunger. Start by placing the plunger over the hole in the center of the bowl. Add enough water to create suction, then pump the plunger up and down. This will create pressure that can help to dislodge the clog.
If a plunger doesn’t do the trick, you may need to use a plumber’s snake. Start by feeding the snake into the hole in the center of the bowl. Turn the handle clockwise to rotate the snake and break up the clog. Once the clog has been broken up, flush the toilet to clear it away.
If you’re still having trouble, you may need to call a professional plumber. They can use special tools to unclog your toilet and get it working properly again.
How Can You Tell if Your Pressure Assist Toilet is Clogged?
If your pressure assist toilet is clogged, you may notice that the flush is weaker than usual or that the bowl doesn’t empty completely. Another sign that your toilet is clogged is if it makes strange gurgling noises when you flush. You can do a few things to try and clear the clog.
How Can You Prevent Your Pressure Assist Toilet From Clogging in the Future?
There are a few things you can do to help prevent your pressure assist toilet from clogging in the future:
- Avoid flushing anything other than human waste and toilet paper down the toilet.
- Do not flush excessively. If you notice that your toilet is starting to clog, stop using it until you can clear it.
- Inspect your toilet regularly for any signs of a clog, and clear any clogs as soon as possible.
- If you have hard water, consider using a water softener to help reduce the build-up of minerals in your toilet.
- If you have a septic system, have it inspected and pumped regularly to help prevent clogs.
Following these tips can help keep your pressure assist toilet running smoothly for years to come.
Is It Necessary to Call a Plumber to Unclog a Pressure Assist Toilet?
Pressure-assist toilets are designed to move water through the bowl more quickly and forcefully than a standard gravity toilet, making them less likely to become clogged. However, if your pressure assist toilet becomes clogged, you can do a few things before calling a plumber.
First, check to see if anything is blocking the tramway, such as a foreign object or an excess of toilet paper. If the tramway is clear, then try using a plunger to force the clog through.
If neither of these methods works, then you may need to disassemble the toilet and clear the clog from the internal components. This is a more complex task that someone with experience in plumbing should only attempt. If you are not confident in your ability to fix the problem, then it is best to call a professional.
You Can Check It Out to Unclog Laundry Sink
How Much Will It Cost if You Hire a Plumber?
If you’re facing a clogged pressure assist toilet, the cost of hiring a plumber will likely fall between $100 and $200. This price range covers most basic services, such as unclogging the drain and clearing the blockage.
However, the cost could be much higher if your problem is more serious, such as a sewer line backup. In addition, hiring a professional may be the only way to solve the problem. DIY methods may not work with a pressure assist toilet and attempting to fix the issue yourself could cause further damage.
Conclusion
If your toilet is clogged and you cannot fix it, you may need to unclog your pressure-assist toilet. This type of toilet uses a small amount of water to push waste through the pipes and into the sewer system. If your pressure assist toilet is clogged, there are a few things that you can do to fix it.
First, you can use a plunger to push the waste through the pipes. If this does not work, then you may need to use a drain snake to remove the clog. Finally, if everything fails, you can always call a plumber to help you unclog your pressure-assist toilet. I hope this article has been beneficial for learning how to unclog a pressure assist toilet. Make Sure the precautionary measures are followed chronologically.
You Can Check It Out to Replace Toilet Water Supply Line
