How to Get a Ring Out of a Sink Drain

Have you ever dropped your ring down the sink drain and can’t get it out? Kitchen sinks are notorious for getting clogged up with gunk and food particles. But what do you do if your ring slips off your finger and down the drain? When it comes to getting a ring out of a sink drain, there are a few options. 

How to Get a Ring Out of a Sink Drain

You can try one of the methods below on how to get a ring out of a sink drain, or you can call a professional to help. No matter what you choose to do, be sure to avoid using harsh chemicals or tools that could damage your sink or pipes. Choose the method that seems safest and most effective for you, and get that ring out. Keep on reading to learn more!

How Do You Get a Ring off that’s Been on for Years?

This is a trickier situation. If your ring has been stuck on for years, you’ll need to be more careful to avoid damaging it while getting it off. The first step is to use a lubricant like soap or oil to try and loosen the ring up. To do this, make sure your hands are clean and dry, then work a small amount of the lubricant into your finger and onto the ring. 

Next, twist the ring gently while working it up and down to try and loosen it, taking care not to pull too hard as this could damage your skin or break the ring. If you’re still having trouble getting it off, consider calling a professional jewelry store for help. Although it may cost a bit of money, it’s better to be safe than sorry. 

Once the ring is off, make sure to get it professionally cleaned and inspected to ensure it’s still in good condition.  If a professional is unable to remove the ring, they may be able to cut it off for you. Be sure to ask about all the options before making a decision.  With any luck, you’ll soon have your ring off and be able to breathe a sign of relief.

8 Methods How to Get a Ring Out of a Sink Drain

1. Use a Plunger

One of the simplest and most effective ways to remove a ring from a sink drain is to use a plunger. Plungers work by creating a seal around the drain and then using air pressure to push the water down the drain. This can often be enough to dislodge the ring and allow it to be removed. If the plunger does not work, you can use a piece of wire or a coat hanger to reach down the drain and remove the ring.

Use a Plunger

2. Use Boiling Water

Another effective method for removing a ring from a sink drain is to use boiling water. Boiling water can help to break down the grease and grime that may be holding the ring in place. 

Simply pour a pot of boiling water down the drain and let it sit for several minutes before attempting to remove the ring. While this method may not work as quickly as the plunger technique, it can be more effective in some cases. However, be careful not to burn yourself when pouring the boiling water down the drain.

3. Use Vinegar and Baking Soda

Vinegar and baking soda can also be used to remove a ring from a sink drain. The combination of these two ingredients creates a chemical reaction that can help to break down the grease and grime that is holding the ring in place. Simply mix equal parts vinegar and baking soda together and pour it down the drain. 

Vinegar and Baking Soda Can Also Be Used

Let it sit for several minutes before flushing it with hot water. If the ring is still stuck, repeat the process. You may need to use a plunger or snake to dislodge it if the vinegar and baking soda do not work. In some cases, you may need to remove the sink’s trap and manually break up the blockage. If that is the case, make sure to wear gloves.

4. Use Dish Soap

Dish soap can also be used to remove a ring from a sink drain. The soap will help to break down the grease and grime that is holding the ring in place. Simply pour a generous amount of dish soap down the drain and let it sit for several minutes before flushing with hot water. 

However, if you have a garbage disposal, do not pour the soap into the drain, as it can damage the blades of the disposal. Instead, use an old toothbrush or other brush to work the soap into the area around the drain. Once you have thoroughly scrubbed the ring, flush it with hot water to remove any remaining soap residue.

5. Use Salt

Salt can be used to add flavor and texture to your food creations. It can also be used to help bring out the natural flavors of the ingredients you are using, as well as provide a great source of minerals. Just be sure not to over-salt your recipes since too much salt can make them unappetizing. 

If you’re unsure how much salt to use, start with a light sprinkle and increase as needed until you find the right balance. For savory dishes, try adding herbs and spices along with salt for added flavor complexity. 

For sweet dishes, consider adding in a pinch of sea salt or fleur de sel for some delicate salinity that won’t overpower the other flavors. Lastly, when it comes to specialty sea salts, there are plenty of options to choose from! Himalayan pink sea salt, black lava sea salt, and smoked sea salt are all flavorful and unique options. Try experimenting with different kinds to find the one that best fits your dish.

6. Use Borax

Borax can also be used to clean carpets. To use it, make a solution of one teaspoon of borax and one quart (1 liter) of warm water. Mix the solution well and pour it into a spray bottle. Spray the mixture onto your carpet and scrub with a brush. 

Borax Can Also Be Used to Clean Carpets

Allow the area to dry fully before vacuuming up any residue that may remain after cleaning. Be sure to spot-test an area first, as Borax can fade certain colors in carpets if not used correctly. If you are unsure how your carpet will react, always consult with a professional carpet cleaner first. 

7. Use Lemon Juice

Lemon juice can be a great way to remove rust from metal surfaces. Simply apply some fresh lemon juice directly onto the rusted surface and let it sit for about 10 minutes. After that, scrub the area with a steel wool pad or brush to remove the rust. You may need to repeat this process several times before all of the rust is gone. 

Another option is to make a paste using lemon juice and baking soda and apply it directly onto the surface. This method works great if you have a particularly stubborn spot of rust on your metal item. Allow the paste to sit for 10–15 minutes before wiping it off with a damp cloth or sponge. The acidity of lemon juice can also help prevent future rusting by forming an invisible protective layer over the metal surface. For best results, use fresh lemon juice instead of store-bought varieties.

8. Use Vinegar

Vinegar is another great way to clean rust from metal surfaces. Simply submerge the item in a bowl or container of vinegar and let it sit for several hours. The acetic acid in the vinegar will dissolve the rust, making it easy to scrub off with a steel wool pad or brush. If you don’t have enough vinegar to fully submerge the item, you can also use a cloth soaked in vinegar to wipe down the surface. 

You may need to repeat this process several times before all of the rust is gone. To protect against future rusting, you can rinse off the metal item with some cold water and then dry it thoroughly after cleaning. Vinegar is also an effective cleaner for removing hard water deposits from metal items as well.

Things to Consider When Getting a Ring Out of a Sink Drain

1. Safety:

Always use caution when attempting to get a ring out of a sink drain – never put your hands down the drain. If you can’t reach the ring, it’s best to call a professional plumber.

2. Tools:

Depending on what type of sink and drain you have, certain tools may be more suitable for getting the ring out than others. Consider using small pliers or tweezers if possible. Otherwise, rubber gloves and a thin metal hanger should do the trick in most cases. 

Consider Using Small Pliers

3. Prevention:

To avoid this situation in the future, always make sure jewelry is removed before washing hands or dishes and keep an eye on any small objects that could fall into drains when cleaning them.

Conclusion

As you can see, getting a ring out of a sink drain is not as difficult as it may seem. By following the simple steps outlined in this blog post, you should be able to remove the ring from your drain quickly and easily. 

If you find that the ring is too tight or won’t budge, don’t hesitate to call a professional plumber for assistance.
Thanks for reading our blog post on how to get a ring out of a sink drain! We hope you found it helpful and informative.

You Can Check It Out to Get Rid of Roots in Septic Lines

Photo of author

Terry Alexander

Hi, I am Terry. I started my professional life as a handyman and did a lot of external and internal repair of home and plumbing support. From my childhood, my passion for home repair and fixtures created an opportuinity to pursue a career in HVAC and plumbing industry. As I gained years of knowledge and my love for plumbing grew overtime, I thought to document my journey so that I could help others who ran into daily problems in their home repair. Hopefully it will help you fix those pesky home repair and plumbing problems that always seem to happen at the worst time possible!

Leave a Comment